DONGFANG TURBINE · INDUSTRIAL COMPRESSORS
CC centrifugal compressors
Compare CC centrifugal compressor model pairs, casing split arrangements and catalogue flow bands, with pressure-label limits stated exactly as published for initial procurement review.
- Catalogue model pairs
- 16
- Casing arrangements
- M horizontal split / B vertical split
- Flow unit
- Nm³/h
PRODUCT OVERVIEW
CC centrifugal.
The CC centrifugal family is presented as 16 M/B model pairs. Each pair shares one catalogue row containing an impeller diameter and a flow band in Nm³/h.
The catalogue labels M as horizontal split with <6 MPa and B as vertical split with >6 MPa. Share your actual pressure duty and specification so the manufacturer can assess the required arrangement.
CATALOGUE REFERENCE
Series parameters.
Compare each row as a separate catalogue reference. Final selection depends on the complete operating duty.
Scroll the table horizontally to see every parameter, source and enquiry link.
| Model pair | Impeller diametermm | Flow rangeNm³/h | SourcePDF page | Enquiry |
|---|---|---|---|---|
| CC1M / CC1B | 278 | 3200–7900 | p. 9 ↗ | |
| CC2M / CC2B | 350 | 5100–12600 | p. 9 ↗ | |
| CC3M / CC3B | 400 | 6700–16500 | p. 9 ↗ | |
| CC4M / CC4B | 450 | 8500–20900 | p. 9 ↗ | |
| CC5M / CC5B | 500 | 10400–25800 | p. 9 ↗ | |
| CC6M / CC6B | 560 | 13100–32400 | p. 9 ↗ | |
| CC7M / CC7B | 630 | 16600–41000 | p. 9 ↗ | |
| CC8M / CC8B | 710 | 21100–52100 | p. 9 ↗ | |
| CC9M / CC9B | 800 | 26800–66100 | p. 9 ↗ | |
| CC10M / CC10B | 900 | 34000–83700 | p. 9 ↗ | |
| CC11M / CC11B | 1000 | 41900–103400 | p. 9 ↗ | |
| CC12M / CC12B | 1120 | 52600–129700 | p. 9 ↗ | |
| CC13M / CC13B | 1250 | 65600–161500 | p. 9 ↗ | |
| CC14M / CC14B | 1400 | 82200–202600 | p. 9 ↗ | |
| CC15M / CC15B | 1500 | 94400–232600 | p. 9 ↗ | |
| CC16M / CC16B | 1600 | 107400–264700 | p. 9 ↗ |
The model table is transcribed from the manufacturer's compressor catalogue, PDF physical page 9. The published <6 MPa and >6 MPa labels are retained without changing their inequality signs.
Exactly 6 MPa, the pressure reference and an upper pressure limit are not specified on this series page; the labels alone do not establish suitability for a project.
This series table does not define model power, gas compatibility, materials or the complete package supply scope.
Full source reading notes
Each row is one shared flow band for an M/B model pair.
The catalogue labels M <6MPa and B >6MPa. Exactly 6MPa and the pressure reference are not specified.
Power is not listed per model in this series table.
Series scope.
- CC is the centrifugal compressor family in the manufacturer's series catalogue.
- Each M/B pair shares a listed impeller diameter in millimetres and one flow band in Nm³/h.
- M denotes the catalogue's horizontal split arrangement, labelled <6 MPa.
- B denotes the catalogue's vertical split arrangement, labelled >6 MPa.
SOURCE DOCUMENTS
Technical literature.
Source file: 【中英文】东方汽轮机压缩机产品介绍-20261008-2.pdf
START YOUR ENQUIRY
Bring the key information together.
Send the details you already have. CHENDA will coordinate open technical questions with the manufacturer.
- Gas composition, contaminants and process specification.
- Required flow for each duty case, with units and normalized-flow reference conditions.
- Suction and required discharge pressures, stating gauge or absolute pressure.
- Inlet temperature, operating cases and any specified turndown requirement.
- Driver, speed and control or package interface requirements, where specified.
- Project datasheet, required supply boundary, site location and delivery schedule.
Questions about this series.
What is the published difference between M and B?
The catalogue identifies M as horizontal split with <6 MPa and B as vertical split with >6 MPa. It does not allocate exactly 6 MPa or identify whether these pressure labels are gauge or absolute.
Does the table contain 16 models or 16 model pairs?
It contains 16 M/B pairs. Each row gives a shared impeller diameter and flow band for that pair; it does not provide separate flow data for its M and B variants.
Where is the required power for each model?
Power is not listed in this series table. Submit the gas composition, flow, inlet conditions and required discharge pressure for project-specific technical assessment.